How to pair the Pebble 2 Combo the Studio Series Logitech Bluetooth Keyboard to a device

Pebble 2 Combo the Studio Series Logitech Bluetooth Keyboard

Connect your Bluetooth keyboard to your device(s)

To pair through Bluetooth:

1. Remove the pull tab from the back of keyboard and mouse. They will automatically turn on. The #1 will be ready to pair.

1. Open the Bluetooth settings/preferences on your device. 
2. Search through available devices and select “Pebble K380s” for keyboard and “Pebble M350s” for mouse. 
3. Your device is now paired! It will say “Connected” next to “Pebble K380s” and “Pebble M350s” and the light will stop blinking. 

Pair a second device or third device

Your keyboard can be paired with up to three different devices and you can use the Easy-Switch button to toggle between them.

If you want to pair additional devices to your keyboard:

1. Select the channel (F1, F2, F3) you want using the Easy-Switch button (the three numbered buttons on the top left of the keyboard and the button on the back of the mouse) — press and then hold the same button for three seconds. This will put the keyboard in discovery mode so it can be seen by your computer. The LED will start blinking rapidly.
2. Open the Bluetooth settings on your computer to complete the pairing. 
3. Once paired, a short press on the Easy-Switch button lets you toggle between your devices.

Logi Bolt receiver connection method (optional)

1. Plug the Logi Bolt receiver into a USB-A port on your computer.

For each device: 

1. For Mac, press “Fn” and “O” for 3 sec. 
2. For ChromeOS, press “Fn” and “C” for 3 sec. 
3. For Windows, press “Fn” and “P” for 3 sec

Pairing a device again

If a device becomes disconnected from the keyboard, you can easily re-pair the device with the keyboard. Here's how:

On the keyboard

• Press and then hold down the Easy-Switch button until the status light starts blinking rapidly. 
  The keyboard is now in pairing mode for the next three minutes.

On the device

1. Go to Bluetooth settings on your device and select Pebble K380s/Pebble M350s when it appears in the list of available Bluetooth devices.
2. Follow the onscreen instructions to complete the pairing.
3. Upon pairing, the status LED on the keyboard stops blinking and remains steady for 10 seconds.